* BURGLARY - RTS Motors, Tandem Industrial Estate, Waterloo, May 10.
Lightly sand all of the taped areas, however concentrate sanding on the outer edges of the mudded areas such that all seams and ridges are eliminated and blend into the main surface areas.* ATTEMPTED BURGLARY -Almondbury, May 14. Raider snapped europrofile lock on upvc door, but was. disturbed by occupant and made off on foot.� High ceilings are very fashionable at present but you have to decide for yourself if they fit both: your budget and tastes. High ceilings take away living space. The same space might be used for an extra bedroom. You have to decide if you are after esthetics or practicality.� I often see bathrooms next to the kitchen in older homes. This is definitely a bad combination and something you should avoid at all costs.For bathrooms or other moist areas Greenboard should probably be used as this material is moisture resistance.Finally, inspect all of the framing carefully. Ensure that nailers (e.g. 2� x 4�s) are existent at each corner and header, that the framing is straight, and that the framed walls create smooth planes. In addition, the ceiling should have strapping applied (1� x 3� cross boards). Also, make sure metal protection plates have been installed to studding where sheetrock screws or nails could inadvertently penetrate plumbing pipes or electrical wire.Once the ceiling is done, you can move on to the walls. Repeat the same process, however with the outside corners just apply a liberal coat of joint compound to the valley that is formed by the corner bead. This valley typically represents the first 3 or 4 inches from the edge of the corner.
CONTACT: Dave Whitteron, Neighbourhood Watch Liaison, Kirkburton Police Station, Telephone: 01484-436840 or email: dw368@westyorkshire.pnn.police.uk or call Crimestoppers on 0800-555-111
No comments:
Post a Comment